Registering Web content
Use EPSON TMNet WebConfig to register Web contents on this product, following the
procedures below.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT's IP address"/webconfig
The default IP address for this product is "192.168.192.168".
2
Select [Settings] - [Web service settings], then [Update settings].
The "Web content update settings" screen is displayed.
3
Select [Browse...], and specify the file (zip file format) you want to
register, then click [Upload].
Chapter 2 Setup
2
93