Installing the appliance
Whilst counterholding adjusting bolts
with a screwdriver, tighten nuts
on the appliance door with ring span‐
ner .
Cover strip must be completely
hidden in the niche, and must not
protrude.
92
Drill holes in the furniture door and
fit screws . Make sure the two met‐
al edges are aligned (Symbol //).
Close the appliance door and the fur‐
niture door.
- Depth adjustment (Z)
Loosen screws at the top of the
appliance door, and screw on the
fixing bracket at the bottom. By mov‐
ing the furniture door, create a gap of
2 mm between the furniture door and
the housing unit.