How To Install The Water Supply Pipe - LG LSSB2791 series Installation Manual

8. How to install the water supply pipe

2) Pull out the water supply pipe from the bottom of the
product and prepare to disassemble/reassemble the
connecting part of the water service pipe.
3) After connecting the water supply pipe and the water service
pipe, tighten them with a spanner to avoid any leakage. After
installing the product within the cabinet, recheck for any
water leakage.
※ Prepare a bucket under the water service pipe connector before checking for any water
leakage to avoid ruining the flooring material and carpet etc.
4) Reassemble the bottom grill in the reverse order of 1).
5) Flush air from the system by running water through the dispenser
continuously for 5 gallon.
Note: Allow 1~2 minute delay in water dispersal to allow internal
water tank to fill.
※ Check the location and installation detail of the water
service pipe on the previous page before connecting the
water supply pipe. Before inserting the product completely
into the cabinet, check if there is any water leakage.
1) Disassemble the bottom grill.
(Both the left and right sides are disassembled and
reassembled in the same method.)
- Use the (+) driver to disassemble the bottom grill.
9