Technical Specifications; Dimension - Denon AVR-E200 Service Manual

TECHNICAL SPECIFICATIONS
n Audio Section
• Power amplifier
Rated output :
Front :
75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
130W+130W(6Ω, JEITA)
Center :
75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
110 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
130W(6Ω, JEITA)
Surround :
75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
110 W + 110 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
130W+130W(6Ω, JEITA)
Output connectors : 6 – 16 Ω
• Analog
Input sensitivity/Input impedance : 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N : 98 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance : 1 Vp-p, 75 Ω
Frequency response: 5 Hz – 10 MHz — 0, –3 dB

DIMENSION

Unit : in. (mm)
1 49/64
(45.0)
Weight : 17 lbs 7 oz (7.9 kg)
17 3/32 (434.0)
13 35/64 (344.0)
8
n Tuner section
[FM](Note: μV at 75 Ω, 0 dBf = 1 x 10
Receiving Range (for E3/E3B) :
[FM] 87.5 MHz – 107.9 MHz
Receiving Range (for E2, E1C) :
[FM] 87.5 MHz – 108.0 MHz
Usable Sensitivity :
[FM]1.2 μV (12.8 dBf)
50 dB Quieting Sensitivity :
[FM]MONO 2.8 μV (20.2 dBf)
S/N (IHF-A) :
[FM]MONO 70 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic Distortion (at 1 kHz) :
[FM]MONO 0.7 %
STEREO 1.0 %
n General
Power supply : (for E3/E3B) : AC 120 V, 60 Hz
(for E2/E1) :
(for E1C) :
Power consumption : 3 30 W
0.3 W (Standby)
2 23/64
(60.0)
1 49/64
(45.0)
W)
–15
[AM]520 kHz – 1710 kHz
[AM]522 kHz – 1611 kHz
[AM]18 μV
AC 230 V, 50 Hz / 60Hz
AC 220 V, 50 Hz