Selecting Cycles And Options/Starting Dishwasher - Maytag DWU8450AAX Manual

SELECTING CYCLES AND OPTIONS/STARTING DISHWA
APPROX.
CYCLE SETTING SEQUENCE CYCLE TIME WATER USE
RINSE _ HOLD:
Use to rinse a relatively few soiled dishes Rinse 7 Min. 2 Gal.
which are to be held until the dishwasher is
full. Turn knob to Rinse & Hold.
QUICK WASHRINSE:
Use to quickly wash dusty or very lightly soiled Wash ] 5 Gal.
dishes you wish to store or reuse immediately. 2 Rinses J_ 17 Min.
Turn knob to Quick Wash/Rinse.
LIGHTCHINA:
Use for china and crystal and for loads Rinse 7 Gal.
containing medium to light amounts of soil. Main Wash 41 Min.
Turn knob to Light/China. 2 Rinses
Dry 35 Min.
76 Min. + Heating Delay °
NORMAL CYCLE:
Use for washing loads containing normally PreWash 1 9 Gal.
soiled dishes. This would include dishloads Rinse
with problem soils. Turn knob to Normal Main Wash | 49 Min.
Cycle. 2 Rinses
_-- 35 Min.
84 Min. + Heating Delav °
POTS & PANS:
Use for loads with heavy or dried soils. Turn PreWash I 1 Gal.
knob to Pots & Pans. 2 Rinses
--64 Min.
Main Wash
2 Rinses
Dry 35 Min.
99 Min. + Heating l)elay _
°The TEMP BOOST SENSOR may extend the main wash to heat the water to proper temperature. The HEATING
DELAY indicator will light when the cycle is being extended due to low water temperNures.
PAGE 8