Sceptre E325 Series User Manual page 6

GENERAL Display FUNCTION BUTTONS
POWER – Turns the Display on or off.
1.
SOURCE – Press this button to cycle through the INPUT source.
2.
CC – Cycles between different closed captioning modes.
3.
MTS – Selects stereo, mono, or second audio programming.
4.
MUTE – Turns the sound off from the Display. To unmute either press VOL(+) or press the MUTE button
5.
again.
NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are watching TV. The
6.
channel will change after 2 seconds. For switching DVD chapters over 100 the 0 button acts as the 100
button, so press the 0 button twice to get that chapter. （Optional）
7.
(-)– Inserts the dash for selecting digital channels directly.
R – Returns to the previous channel. For switching DVD chapters over 100 the R button acts as the 100+
8.
button, so press the R button and the number you want to switch to. For example for chapter 125 you
would press R and 2 and 5 for the combination of 125.
GUIDE – Opens the current digital channel information guide (antenna only).
9.
INFO – Shows the display info.
10.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the Display's menu and the
11.
DVD's menu. Press the ENTER button when you want to select a particular option.
MENU – Brings up the main Display menu on the screen.
12.
EXIT – Exit the main Display menu on the screen.
13.
VOL(+) / VOL(-) – Press the VOL buttons to increase or decrease the sound level.
14.
ASPECT – Selects different viewing modes of the Display.
15.
FREEZE – Press this button to freeze the picture on the screen.
16.
SLEEP – Turns the Display off in a specific set of time dependent on your selection.
17.
CH(+)/CH(-) – Press the CH buttons to go through the channel list.
18.
PICTURE – Selects various preset picture settings.
19.
SOUND – Selects various preset sound settings.
20.
FAVORITE – Gives you, the favorite channels list.
21.
ADD/DEL – This button adds or deletes a channel from the favorite channels list.
22.
DVD FUNCTION BUTTONS
AUTO EJECT – Press this button to open or close the DVD player.
23.
D.MENU – Shows the menu of the DVD disc.
24.
DVD – Press this button to go to the DVD source.
25.
USB – Launches the USB reader function for the pictures and music.
26.
►/║ – Play/pause button in DVD mode.
27.
■ – Stop button in DVD mode.
28.
REPEAT – Press this button for repeat the program.
29.
AB – Press this button for repeat play point A and B
30.
PREVIOUS CHAPTER – Press this button to select the DVD's previous chapter.
31.
REWIND – Press this button to reverse the DVD movie to a previous scene.
32.
FAST FOWARD – Press this button to fast forward the DVD to the next scene.
33.
NEXT CHAPTER – Press this button to select the DVD movie's next chapter.
34.
D.SETUP – Press this button to setup the disc in DVD mode.
35.
TITLE – Press this button to go to the title menu if the DVD you're watching has a title page.
36.
SUBTITLE – Displays the subtitle.
37.
AUDIO – Press to select Display sound option.
38.
Please Note:

To insert, eject a disc from the DVD player, to use any functions on the DVD you must press
the DVD button first.

This display does not support QAM function. You need to have a digital cable box in order to
receive cable channels.

The remote picture might be different from the actual remote. Please refer to the user manual
on our website http://www.sceptre.com
MQR Color Series P6