Table of Contents
Advertisement
This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit or on the main unit and on
the remote control for more than a standard time (second).
Set
Set Key
Condition
TV mode
VOL. (-) MIN
TV mode
VOL. (-) MIN
ALL mode
VOL. (-) MIN
VCR mode
VOL. (-) MIN
(Playback)
VCR mode
VOL. (-) MIN
(Playback)
VCR mode
VOL. (-) MIN
(Playback)
TV mode
VOL. (-) MIN
ALL mode
VOL. (-) MIN
DVD mode
REC/OTR
(No disc)
DVD mode
STOP (DVD)
(No disc)
DVD mode
STOP (DVD)
(Stop)
Set
Set Key
Condition
ALL mode
VOL. (-) MIN
SERVICE MODE LIST
Remocon
Standard
Key
Time
0
2
2
1
2
2
2
3
4
2
5
2
6
2
9
2
4
2
2
2
9
3
Remocon
Standard
Key
Time
FF
2
Releasing of V-CHIP PASSWORD.
Initialization of the factory.
NOTE: Do not use this for the normal servicing.
If you set a factory initialization, the memories are reset such
as the clock setting, the channel setting, the POWER ON total
hours, and PLAY/REC total hours.
Horizontal position adjustment of OSD.
NOTE: Also can be adjusted by using the Adjustment MENU.
Refer to the "ELECTRICAL ADJUSTMENT" (OSD HORIZONTAL).
Adjust the PG SHIFTER automatically.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).
Adjust the PG SHIFTER manually.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).
Adjusting of the Tracking to the center position.
POWER ON total hours and PLAY/REC total hours are displayed on
the screen.
Refer to the "PREVENTIVE CHECKS AND SERVICE INTERVALS"
(CONFIRMATION OF HOURS USED).
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
Initialization of the factory on DVD.
NOTE: Do not use this for the normal servicing.
The function will only work without the setting of DVD disc at
DVD mode.
Releasing of PARENTAL LOCK.
Refer to the "PARENTAL CONTROL - RATING LEVEL".
NOTE: The function will only work without the setting of DVD disc at
DVD mode.
Tray cannot be opened.
Refer to the "TRAY LOCK".
NOTE: No indications on the screen when the Tray Lock is setting.
The BOT, EOT, and the Reel Sensor do not work and the VCR deck
can be operated without a cassette tape.
Refer to the "PREPARATION FOR SERVICING"
C2-1
Operations
Operations
Advertisement
Table of Contents
