Front Turn Signal Lamps; Front Fog Lamp; Front/Rear Side Marker Lamp; Rear Backup Lamp And Turn Signal Lamps - Chrysler 2015 300 SRT Operating Information Manual

Front Turn Signal Lamps

1. Open the hood.
NOTE:
Removal of the air cleaner filter housing
may be necessary prior to replacing bulbs in
the headlamp assembly on the driver side of
the vehicle.
2. Reach behind the headlamp housing to ac-
cess the turn signal (inboard) bulb cap.
3. Firmly grasp the cap and rotate it counter-
clockwise to unlock it.
4. Squeeze the two tabs on the side of the bulb
socket and pull straight out from the lamp
assembly.
5. Disconnect the bulb from the wiring connec-
tor and install the replacement bulb.
6. Install the bulb and connector assembly
straight into the lamp until it locks in place.
7. Install the turn signal bulb cap in the head-
lamp housing and rotate clockwise to lock in
place.

Front Fog Lamp

The Front Fog Lamps use LED sources that are
not serviceable separately. The Front Fog Lamp
must be replaced as an assembly, see your
authorized dealer.

Front/Rear Side Marker Lamp

The Side Markers use LED lamps that are not
serviceable separately. The Side Markers must
be replaced as an assembly, see your autho-
rized dealer.
Rear Backup Lamp And Turn Signal
Lamps
The Rear Backup and Turn Signal Lamp use
LED sources that are not serviceable sepa-
rately. The Rear Lamps must be replaced as an
assembly, please see your authorized dealer.

License Lamp

The License Lamp uses an LED source that is
not serviceable separately. The License Lamp
must be replaced as an assembly, see your
authorized dealer.
Center High Mounted Stop Lamp
(CHMSL)
The CHMSL Lamp uses LED sources that are
not serviceable separately. The CHMSL Lamp
must be replaced as an assembly, see your
authorized dealer
293