Ford Mondeo Owner's Handbook Manual page 74

Electric folding mirrors
Automatic folding and unfolding
Note: If the mirrors have been folded
using the manual fold button they can only
be unfolded using the manual fold button.
The mirrors will fold automatically when
you lock the vehicle with the key, the
remote control or a keyless entry system
request. The mirrors will unfold when you
unlock the vehicle with the key, the
remote control, a keyless entry system
request, the driver's interior door handle
or starting the engine.
Manual folding and unfolding
The electric folding mirrors operate with
the ignition on.
Note: You can operate the mirrors (mirror
tilting and folding) for several minutes after
you switch off the ignition. They will be
deactivated as soon as a door is opened.
E72623
Press the button to fold or unfold the
mirrors.
Windows and mirrors
72
If you press the switch again while the
mirrors are moving, they will stop and
reverse the direction of movement.
Note: When the mirrors are operated
often during a short period of time, the
system may become inoperable for a
period of time to prevent damage due to
overheating.
Reverse mirror dipping
Depending on the switch position (A or
C), the relevant exterior mirror will dip
whenever you select reverse gear, giving
you a view of the kerb.
Note: You can disable this feature by
leaving the switch in position B.
The exterior mirror will return to the
original position:
• If the vehicle speed exceeds 10 km/h
(6 mph).
• Approximately 10 seconds after
reverse gear has been disengaged.
• If the switch is returned to position B.
When you first use this feature, the mirror
will dip to a preset position. This position
can be adjusted using the following
sequence:
1. Turn the ignition on. Do not start the
engine.
2. Select the desired exterior mirror (A
or C).
3. Select reverse gear, the selected
exterior mirror will adjust to a preset
position.
4. Adjust the mirror to the required
dipped position.
5. Disengage reverse gear or press and
hold the desired memory pre-set
button until a single chime sounds to
confirm. See Memory function
(page 124).
The settings will be stored automatically.