Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Prestige Manuals
  4. Gateway
  5. 310
  6. Read me first

Prestige 310 Read Me First

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Prestige 310 Read Me First
PORT
Console
WAN 10M
LAN 10/100M - UPLINK button "on" (pushed in)
LAN 10/100M - UPLINK button "off" (out)
Power 12VDC
Register your Prestige online at www.zyxel.com for free product updates and information.
P
r
e
s
t
i
g
e
R
e
a
r
P
r
e
s
t
i
g
e
R
e
a
r
P
a
n
e
l
C
o
n
n
e
c
P
a
n
e
l
C
o
n
n
e
c
CONNECTION
Use an RS-232 console cable to connect to a serial port
(COM port) on your computer.
Use the cable that came with your broadband modem.
TO A COMPUTER
Straight-through Ethernet
cable
Crossover Ethernet cable
Connect to a power source using the power adapter for your
region (refer to your User's Guide).
t
i
o
n
s
t
i
o
n
s
TO A HUB
Crossover Ethernet cable
Straight-through Ethernet
cable

Advertisement

loading

Summary of Contents for Prestige 310

  • Page 1 LAN 10/100M - UPLINK button “off” (out) Crossover Ethernet cable cable Power 12VDC Connect to a power source using the power adapter for your region (refer to your User’s Guide). Register your Prestige online at www.zyxel.com for free product updates and information.

  • Page 2: Configuring Tcp/Ip

    IP Address 192.168.1.1 Default Password 1234 Subnet Mask 255.255.255.0 DHCP IP Pool 192.168.1.33 – 192.168.1.34 You need a broadband modem and an account with an Internet Service Provider (ISP). Your user (account) name and password. Encapsulation (Ethernet, PPTP or PPPoE) You may need to know your Service Name if you are using PPTP or PPPoE.

  • Page 3: Verifying Tcp/Ip Properties

    Click OK to save and close the TCP/IP Properties window. Click OK to close the Network window. Turn on your Prestige and restart your computer when prompted. Insert the Windows CD if prompted. Verifying TCP/IP Properties Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.

  • Page 4: Procedure For Smt Configuration Via Telnet

    Procedure For SMT Configuration via Telnet Launch a Telnet program. In Windows, click Start and then Run. Type “Telnet” followed by a space and the IP address of the Prestige, (192.168.1.1 is the default) and click OK to display the password screen.
  • Page 5 LAN. Make sure your NIC (Network Interface Card) is installed and functioning properly. I cannot ping any If all of the 10/100M LAN LEDs are off, check the cables between the Prestige and computer on the your computer or hub.