Table of Contents
Advertisement
MOTOR TEST PROCEDURE
COMPONENTS
Fan Motor
(Wire leads removed)
Turntable Motor
(Wire leads removed)
NOTE:
A MICROWAVE LEAKGE TEST MUST ALWAYS BE PERFORMED WHEN THE UNIT IS
SERVICED FOR ANY REASON.
MAKE SURE THE WIRE LEADS ARE IN THE CORRECT POSITION.
WHEN REMOVING THE WIRE LEADS FROM THE PARTS,BE SURE TO GRASP THE
CONNECTOR ,NOT THE WIRES.
TEST PROCEDURE
Measure the resistance.
(Ohm-meter scale:R×100)
Measure the resistance.
(Ohm-meter scale:R×1000)
5-8
RESULTS
Normal:Approx. 47Ω
∞
Abnormal:
or Several Ω
Normal:Approx. 3.2kΩ
∞
Abnormal:
or Several Ω
Hide quick links:
Advertisement
Table of Contents
