Samsung AW0801B Service Manual page 13

Disassembly and Reassembly Procedure(AW1001B/AW1201B/AW1801B)
No. Part Name
4 Plate reinf&
Case evap up
5 Plate evap
casing &
Blower
6 Case Cond &
Fan Propeller
& Motor Fan
4-4
Procedures
1..Remove 4 screws on the partition and case
cond.
2.Remove the plate reinf. (The shape maybe
different depend on models)
3.Remove the seal sticked on the case evap up
carefully.
4.Pull the case evap up upward.
1.Remove the cover on the evaporator.
2.Remove all screws on the evaporator.
3.Pull the evaporator forward carefully.
4.Remove all screws fixed on plate evap
casing, then pull it out completely.
3.Remove the nut and remove the Blower.
1.Remove 2 screws on the rear side of the
base pan, and all screws fixed on case cond.
2.Pull up the condenser from the base pan.
3.Remove the nut and remove the Propeller
fan.
4.Remove 4 screw(fixed on the mounter ), then
take out the motor.
Remarks
Samsung Electronics