Stopping The Engine - Kubota SQ-1120 Operator's Manual

STOPPING THE ENGINE

1. Turn OFF all electrical device switches
for connected loads.
A For the AUS models, also turn OFF the load center
circuit breaker.
2. Turn OFF the circuit breakers.
(1) Circuit breaker
3. Allow the engine to run with no load for
about 5 minutes before stopping the
engine completely.
(A) "OFF"
OPERATING THE GENERATOR
4. Turn the main switch (key) to the "OFF"
position.
(1) Main switch (Key)
5. Turn the fuel lever to the "CLOSE"
position.
(1) Fuel lever
(2) Filter bowl
(A) "OFF"
(A) "CLOSE"
17