Skoda Roomster Owner's Manual page 201

Tail light
Fig. 165 Removing the tail light assembly/disconnecting the plug connec-
tion
Fig. 166 Remove the middle part of the light/bulb arrangement

First read and observe the introductory information and safety warn-
ings on page 194.
Bulb arrangement in the tail light assembly
- Brake lights
1
- Turn signal lights
2
- Reversing light
3
- Rear fog light
4
- parking lights
5
198
Do-it-yourself
» Fig. 166.
Removing and installing the tail light
›
Open the tailgate.
›
Unscrew the light assembly » Fig. 165
›
Grip the light in the upper and lower area and move backwards somewhat.
›
Unplug the connector » Fig. 165 - .
›
To access the bulbs, unscrew the middle of the light assembly and press off the
tabs » Fig. 166 - .
›
To reinstall, screw the middle part of the light onto the housing of the rail light.
›
Reconnect the plug connection and put the light into the original position.
›
Screw the light into place
Replacing the bulbs in the tail lamp assembly
›
Remove the faulty bulb , ,
1 2 3
bulb.
›
To replace the bulb, turn the bulb holder
remove it from the housing.
›
Replace the bulb, insert the holder with the bulb into the housing and turn in a
clockwise direction to the the stop.
- .
or » Fig. 166 from the holder and fit a new
4
anti-clockwise up to the stop and
5
