Table of Contents
Advertisement
• Sound a remote alarm that honks
the horn and blinks the headlamps
and taillamps for 30 seconds.
Press
to activate and again to
deactivate.
The Content Theft-Deterrent System will
arm only if you use the key fob or lock
the doors with a power lock switch. It will
not arm if you lock the door with a key
or use the manual door lock. To turn off
the alarm, press the UNLOCK button on
the key fob or unlock the driver-side
door with the key.
The key fob transmitter's range is from
3 to 30 feet. Refer to Section 2 of your
Owner Manual if it doesn't work or range
is reduced.
Driver 1 and 2 Memory Settings
(if equipped): The number on the back
of the transmitter (1 or 2) corresponds
to the memory button numbers on the
outboard side of the driver's seat.
When the vehicle is unlocked with the
transmitter, it recalls the personalized
settings for that driver (must be enabled
in the Driver Information Center).
See Section 2 of your Owner Manual.
Programmable Automatic
Door Locks
The power door locks can be
programmed to perform a variety of
personalized functions.
Automatic Locking Modes:
• Lock doors when the vehicle is out of
the Park (P) position, or
• Lock door when the vehicle speed
is over 8 mph for three seconds.
Automatic Unlocking Modes:
• Unlock both doors in Park (P), or
• Unlock both doors when the ignition
key is removed, or
• Unlock driver's door in Park (P), or
• Unlock both doors manually.
To Program:
• Press the Driver Information Center
Personalization button (see DIC sec-
tion of this guide) until "AUTOMATIC
LOCKING" appears on the DIC
display.
• Press the SELECT button to select
AUTOMATIC LOCKING.
• Press the SELECT button again to
scroll through the locking modes.
• When the desired mode is displayed,
press the PERSONALIZATION button
to set your choice, return to the
personalization menu and advance to
the next programmable feature.
• Repeat the process to choose one of
the automatic unlocking modes.
See Section 2 of your Owner Manual.
9
Advertisement
Table of Contents
