Fujitsu PCNA EP OCe14102 Installation Manual page 11

2. Hardware Installation
Table 2-1 Cable and Connector Specifications
Cable Type
Fiber Optic Cable for the PCNA EP OCe14102
Short Range, LC-LC Multimode
OM3 – Multimode 50/125 micron fiber (2000
MH *km bandwidth cable) with LC connectors:
z
1 Gbps (Not specified by IEEE 802.3)
10 Gbps
OM2 - Multimode 50/125 micron fiber (500
MH *km bandwidth cable) with LC connectors:
z
10 Gbps
OM1 - Multimode 62.5/125 micron fiber (200
MH *km bandwidth cable) with LC connectors:
z
10 Gbps
10GbE Passive DAC Cable
10GbE Active DAC Cable
To attach devices to the adapter:
1. Connect the appropriate cable to the adapter.
When connecting an optical cable, ensure the cages have optical transceivers
installed in them (see Figure 2-4).
Figure 2-4 Installing an Optical Transceiver
PCNA EP OCe14102 2x 10Gb
Maximum Length
(meters) Length (meters) Connector
550
300
82
26
5
10
Attaching Devices
Minimum
LC
2
2
2
2
0.5 Direct Attach
Copper
Direct Attach
0.5 Copper
Page 11