Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

3 Select 2 by the ND filter knob, and adjust in the same manner as step 2.
4 Select 3 by the ND filter knob, and adjust in the same manner as step 2.
5 Select 4 by the ND filter knob, and adjust in the same manner as step 2.
(6) Perform the OHB matrix adjustment.
[MAINTENANCE] → [OHB|MATRIX] → [OHB|MATRIX|:|ON]
(7) Store the OHB File.
[FILE] → [OHB|FILE] → [STORE|FILE]
With MSU
(1) STANDARD button → ON (lit)
(2) Adjust the black shading automatically.
FILE button → ON (lit)
[Touch panel selection]
[OHB|File] → [Auto|B.|Shading]
Repeat this operation 3 times or more.
When adjustment is not completed correctly, adjust the black shading automatically again, or adjust
the black shading V SAW, V PARA, H SAW, H PARA on R/G/B respectively.
[OHB|File] → [Adjusting] → [Black|shading] → [R/G/B] → [V|SAW], [V|PARA], [H|SAW], [H|PARA]
(3) Adjust the black balance automatically.
BLACK button → ON (lit), or [OHB|File] → [Auto|Black]
(4) Adjust the white shading automatically.
Shoot the white pattern so that the video level is around 80 % (560 mV).
[OHB|File] → [Auto|W.|Shading]
Repeat this operation 3 times or more.
When adjustment is not completed correctly, adjust the white shading automatically again, or adjust
the white shading V SAW, V PARA, H SAW, H PARA on R/G/B respectively.
[OHB|File] → [Adjusting] → [White|shading] → [R/G/B] → [V|SAW], [V|PARA], [H|SAW], [H|PARA]
(5) Perform the ND offset adjustment.
n
Perform adjustments while selecting all ND filters (1 to 4), or the ND offset adjustment will not be
completed.
1 Select 4 by the ND filter knob, and shoot the white pattern so that the video level is 50 % (350 mV)
or more.
2 Select 1 by the ND filter knob, and adjust the lens iris so that the video level is 80 to 50 % (560 to
350 mV), and then adjust the white balance automatically.
WHITE button → ON (lit), or [OHB|File] → [Auto|White]
3 Select 2 by the ND filter knob, and adjust in the same manner as step 2.
4 Select 3 by the ND filter knob, and adjust in the same manner as step 2.
5 Select 4 by the ND filter knob, and adjust in the same manner as step 2.
(6) Perform the OHB matrix adjustment.
[OHB|File] → [Adjusting] → [Matrix]
Change the adjustment display by pressing the button 1, 2 of sub menu, and adjust the value of the
OHB matrix.
(7) Store the OHB File.
[OHB|File] → [OHB|store] → [Store]

BVP-E30/E30P M-V1

4-11 (E)