Panasonic TH-42PF11EK Operating Instructions Manual page 44

High definition plasma display
Table of Contents

Advertisement

Options Adjustments
Item
Off:
Studio W/B
On:
Note: Valid only when the "Warm" is set as "White balance" in Picture menu.
Sharpens the contrast for a better view when a part of the image is too light to see.
Off:
Studio Gain
On:
Note: This setting is valid only when the input signals are as follows:
Off
Off:
Auto: Power is transmitted to the slot power only when main power is on.
Slot Power
On:
Note: In some cases, power is transmitted to the slot power when main power is on or in the standby
Off
You can set the power-on delay time of the displays to reduce the power load, when you press
turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.
Set each display's setting individually.
Off:
1 to 30 (sec.):
Notes:
Power On Screen
• During this function is working, the power indicator is blinking green.
Delay
• This function also works when the power recovers from failure or after plugging off and in again the
Off:
On:
The clock is displayed at the lower left of the screen when
Clock Display
Note: When "PRESENT TIME Setup" is not set, the clock is not displayed even if "Clock Display" is
Sets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of
Off:
On:
All Aspect
Aspect mode of each setting is as follows:
(Example: HD signal)
Off
On
Off:
Rotate
On:
Slot1
Serial Slot Select
Selects the slot which communicates serial.
Note: The setting of an external command can be set only from the fixed serial terminal. (see page 10)
Normalization
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote
ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the
button on main unit together with
The "SHIPPING" menu is displayed and the lock is released when it disappears.
44
Nullify all the settings adjusted.
Sets the white balance for TV studio.
Disables "Studio Gain".
Enables "Studio Gain".
Component Video, RGB (analog), SDI, HDMI
Auto
On
Power is not transmitted to the slot power.
Power is transmitted to the slot power when main power is on or in the standby state.
state regardless of the slot power setting.
1
2
3....
The display will be turned on at the same time as
Set the power-on delay time (second).
After pressing
power cord.
After you unplug and plug the power cord in while the unit is in standby mode and also the power is
being supplied to a terminal board, the unit will start supplying the power to the board with time delay
according to the setting.
The power indicator lights up red fi rst and it turns orange when the power starts being supplied to the
board.
Not display the clock.
Display the clock.
10:00
"On". (see page 27)
button, the aspect changes in the selected mode.
Default aspect mode
All Aspect mode
4:3 4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just
4:3 (1) 4:3 (2) 4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2
Does not rotate the image.
Rotates the image 180 degrees.
Slot2
Slot3
Adjustments
30
, the display will be powered on with time delay depending on this setting.
button on the remote control and hold for more than 5 seconds.
is pressed.
button is pressed.
to

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-50pf11ekTh-58pf11ekTh-65pf11ek

Table of Contents