Bosch ZBR16-3A Series Installation And Service Instructions Manual page 40

40 | Installation
Material
PP-Flex 3" (80 mm) vent or
air pipe M&G
Duravent PolyPro and
Centrotherm
PP-Flex 2" (50 mm) vent or
air pipe M&G
Duravent PolyPro and
Centrotherm
PVC Pipe cement/primer
CPVC
Table 17 Materials for pipe
1) Components of the certified vent systems must not be interchanged with other vent systems or unlisted pipe fittings. Plastic components, and specified primers and glues of
the certified vent system must be from a single system manufacturer and not intermixed with other system manufacturer's vent system parts.
For installations in Canada, field supplied plastic vent piping must
comply with CAN/CGA B149.1 (latest edition) and be certified to the
Standard for Type BH Gas Venting systems. ULC S636 Components of
this listed system shall not be interchanged with other vent systems or
unlisted pipe/fittings. All plastic components and specified primers and
Roof terminals Material
Ø 3" / Ø 5" (Ø 76/125 mm) concentric PVC
Ø 3" / Ø 5" (Ø 76/125 mm) concentric CPVC
Ø 3" / Ø 5" (Ø 80/125 mm) concentric PP
Ø 3" (80 mm) PolyPro Flex Chimney Cap (PP)
with base support PolyPro Support Elbow
Base Suport + SW to Flex Coupler
Ø 2" (50 mm) PolyPro Flex Chimney Cap (PP)
with base support PolyPro Support Elbow
Base Suport + SW to Flex Coupler
Table 18 Roof terminals
Wall terminals
Ø 3" (Ø 76 mm)
90 °-elbow with
inlet screen
Ø 3" (Ø 76 mm) twin pipe termination
Ø 3" (Ø 76 mm) single pipe termination
Ø 3" / Ø 5" (Ø 80/125 mm) Bosch Greenstar
Horizontal Telescopic Terminal Kit
Table 19 Wall terminals
NOTICE:
▶ DO NOT use cellular core pipe.
▶ DO NOT use PVC when using anti-freeze in the
primary circuit of the boiler. Use CPVC, PP or
stainless steel only!
6 720 806 992 (2015/03)
Item United states
ANSI Cat IV
Approved Polypropylene
InnoFlue
ANSI Cat IV
Approved Polypropylene
InnoFlue
ANSI/ASTM D2564
ANSI/ASTM F493
Supplier
IPEX System 636
IPEX System 636
M&G Duravent PolyPro and Centrotherm
InnoFlue
M&G Duravent PolyPro
Centrotherm InnoFlue
M&G Duravent PolyPro
Centrotherm InnoFlue
M&G Duravent PolyPro
Centrotherm InnoFlue
M&G Duravent PolyPro
Centrotherm InnoFlue
Flue System / Materials Supplier
parallel stainless steel
PVC (elbow)
stainless steel (screen)
PP
PP
PP
Canada
BH Gas venting systems,
1)
ULC S636 ,
Class IIA - PVC,
Class IIB - CPVC,
Class IIC - Polypropylene
(certified to ULC S636)
glues of certified vent systems must be from a single manufacturer and
not intermingled with other system manufacturer's vent system parts.
The supplied vent connector and separate available vent termination are
certified as a part of the Greenstar Boiler.
Flex-L
IPEX (elbow)
Langly Wire (screen)
M&G Duravent PolyPro
M&G Duravent PolyPro
Bosch (manufactured by
M&G Duravent)
X X X X X X
X X X X X
X X X X X X
X X X X X X
Part number
196006
197009
3PPS-VK (-TC) (M&G Duravent) or
ICRT3539 (Centrotherm)
3PPS-FCT
ISCP03
3PPS-SE90X
ISBS0387 + IFSFC03
2PPS-FCT
ISCP02
2PPS-SE90X
ISBS0287 + IFSFC02
Part number
46546901
ULC S636 approval (elbow)
L2594 (screen)
3PPS-HTP
3PPS-HST
7738003218
Greenstar
X
X
X