U-Line 3018RGL User Manual page 58

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Relay Toggle
Up
Down
Relay toggle is used to manually switch the state of each
relay to test for proper operation. In addition to the AC
relays, DC switches may also be toggled. Relay toggle can
also be used to force the unit into a particular state. For
example, to force a 3036 into a cooling cycle activate
LVLV, Comp, F1, and F3.
ID Description
Mull Mullion Heater (Not Used)
Cond Fan (Not Used)
Def Defrost Valve (Not Used)
Pan Pan heater (Not Used)
Comp Compressor
F1 Evaporator Fan
F3 Condenser Fan
L1 Zone Lighting
To access Relay Toggle
4. Use Down to select "Relay Toggle".
5. Press Select .
6. Use Up and Down
and DC output.
7. Press Select to toggle.
To exit the Relay Toggle menu use Up
to Menu" and press Select
Select
RETURN TO MENU
RELAY TOGGLE
MULL OFF
COND OFF
Solution
AC
AC
AC
AC
AC
DC
DC
DC
to scroll through each relay
to select "Return
to confirm.
Input Status
Up
Down
Input status displays the current state of each available
input as well as the current USB connection state.
ID Description
Door Door Switch
Test Input Factory Test Input
USB USB Connection State
Note: USB status show current connection state. In order
to make a successful connection, USB connection type
must be properly set in "USB Port" under the service
menu.
To access Input Status
1. Use Down to select "Input Status".
2. Press Select .
3. Use Up and Down
information.
To exit the Input Status menu use Up
to Menu" and press Select
u-line.com
Select
RETURN TO MENU
INPUT STATUS
DOOR OPEN
IN2 OPEN
Type
Open - Closed
Open
Flash - Com Port
to scroll through available
to select "Return
to confirm.
Control Operation - Service 4