Cd Mechanism Section - Sharp CD-BA160H Service Manual

How to remove the motor (See Fig. 13-1)
1. Remove the belt.
2. Remove the screws (F1) x 2 pcs., to remove the motor.

CD MECHANISM SECTION

Perform steps 1, 2, 3, 12, 13, 14 and 15 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 13-2)
1. Remove the belt (A1) x 1 pc., from the motor side.
2. Bend the hooks (A2) x 5 pcs., to remove the loading motor.
How to remove the pickup (See Fig. 13-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x1pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
(F1) x2
Ø 2.6 x 5mm
TAPE2
Disc Tray
(B1) x2
ø2.6 x6mm
Shaft
(B2) x1
– 13 –
CD-BA160H/1700H
Motor
Figure 13-1
Loading Motor
PWB
(A2)x2
(A2)x3
Belt
(A1)x1
Figure 13-2
Stop Washer
(B3) x1
CD Mechanism
Gear
(B4) x1
Figure 13-3
Loading
Motor
Pickup