Asus B150 PRO GAMING D3 User Manual page 60

CPU Graphics Current Capability [Auto]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high GT loading for extra power
support.
CPU Graphics Switching Frequency [Auto]
This item affects the GT transient response speed and the component thermal production.
Select [Manual] to configure a higher frequency for a quicker transient response speed.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the GT VRM Switching Frequency to
[Manual].
Fixed CPU Graphics Switching Frequency (KHz) [300]
This item allows you to set a higher frequency for a quicker transient response speed.
Use the <+> and <‑> keys to adjust the value. The values range from 250KHz to
500KHz with a 50KHz interval.
CPU Graphics Power Phase Control [Auto]
This item allows you to set the power phase control of GT. Configuration options: [Auto]
[Standard] [Optimized] [Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
2.5.11 Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and their features.
Intel SpeedStep
®
This item allows the operating system to dynamically adjust the processor voltage and cores
frequency, resulting to a decreased average power consumption and decreased average
heat production. Configuration options: [Disabled] [Enabled]
Turbo Mode [Enabled]
This item allows you to enable your core processor's speed to run faster than the base
operating frequency when it is below operating power, current and temperature specification
limit. Configuration options: [Disabled] [Enabled]
The following items appear only when you set the Turbo Mode to [Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio's time duration that exceeds the TDP (Thermal
Design Power) for maximum performance. Use the <+> or <‑> keys to adjust the value.
The values range from 1 W to 4095 W.
2-20
[Enabled]
TM
Chapter 2: Getting started