Disassembly; Removing The Case; Removing The Cd Mechanism Module; Removing The Grille Assy - Pioneer DEH-M6106 Service Manual

DEH-M6106ZH,M6106ZH-02

7.1.3 DISASSEMBLY

-
Removing the Case (not shown)
1. Remove the Case.
- Removing the CD Mechanism Module (Fig.1)
Remove the four screws.
Disconnect the connector and then remove the CD
Mechanism Module.
- Removing the Grille Assy (Fig.1)
Remove the two screws and then remove the
Grille Assy.
- Removing the Heat Sink (Fig.2)
Remove the two screws(M3 x 12).
Remove the screw(M3 x 6).
Remove the two screws.
Remove the screw and then remove the
Heat Sink.
- Removing the Tuner Amp Unit (Fig.3)
Remove the screw.
Straight the tabs at three locations indicated.
Remove the two screws and then remove the
Tuner Amp Unit.
48
CD Mechanism Module
Grille Assy
Heat Sink
Tuner Amp Unit
Fig.1
Fig.2
Fig.3