Table of Contents
Advertisement
Installation
1
Lower cooktop into cutout.
3
After placing cooktop in the cutout, screw brackets
to burner box with sheet metal screw. (Six bracket
assemblies included - 2 per side, 1 front, 1 rear)
2
Connect the red and black leads from the unit
conduit to the corresponding leads in the
4
Cooktop
Countertop
Filler
Block
Screw
Bracket
Screw sheet metal screws into brackets
and tighten firmly against bottom of countertop.
Note: It is recommended to use a filler block
between the bolt and the underside of the
countertop to prevent any damage to the
countertop. Failure to do so may result in
cracking or splitting of the countertop.
12
Green
Neutral
Red
Black
junction box.
Cooktop
Countertop
Eye Bolt
Bracket
Filler
Block
Advertisement
Table of Contents
