iintenanceand care
Thermal motorprotection
Aninternal t hermalprotector h asbeendesigned
intoyourcleaner to protect i t fromoverheating.
Whenthethermalprotector a ctivates, the main
vacuummotor will stopoperating. If thishappens,
proceed as follows.
1.
Turnthe cleanerOFFand unplugfrom
electricaloutlet.
3.
4.
Checkthe cleanerfor the sourceof
overheatingproblem(i.e.full dirt cup, dirty
filters or clog).
Fixthe problemby following the steps in the
maintenancesection of the user guide.
Whenthe motor coolsfor approximately
30 minutes,the thermal protector
automaticallyresetsand cleaning may
continue.If the cleanerwill not turn on or the
thermal protectorcontinuesto activate, your
cleanermay need servicing.Call BISSELL
ConsumerServicesor visit the website to
locatean authorizedServiceCenter.
Note:Thethermalprotectorcontrols the
mainvacuummotoronly,notthe brush
motor.If the thermalprotector activates,
the brushwill continue to operatenormally;
however, t herewill be nosuction.
12
www.bissell.com
800,237.7691