Wireless Lan - NEC WT615 Setup Manual

4. Setting the LAN Setting of Projector

4-3. Wireless LAN

Configure the LAN settings in the "Profile" page of "LAN Mode" selected from On-Screen
Menu.
Flow of Setting
Step 1 Display "Profile" page of "LAN Mode".
Step 2 Select "Profiles".
Step 3 Enable or disable "DHCP".
If "Disabled" (without check mark)
Step 4 Input "IP Address".
Input "Subnet Mask".
Input "Gateway".
Step 5 Input "DNS Configuration".
Step 6 Setting of "Advanced".
6-1. Setting of "Network Type".
Select SSID in "Site Survey".
Input "SSID" (if necessary).
Select "Mode" (if necessary).
18
Step 7 Finalize "Advanced".
Step 8 Reconnect the network.
Step 9 Finalize the setting.
If "Enabled" (with check mark)
6-2. Setting of "WEP"
Select the number of bits of "WEP".
Select "Key Select".
Set "Key 1 to Key 4".
If "Easy Connection" is selected