Sony KDL-40BX450 Service Manual page 35

3. Using the button, scroll down to select Color Temp.
Input Source
White Balance
Internal Pattern
Color Temp
Aging Mode
ADC Calibration
TVD ADC Calibration
Auto Phase
Factory Reset (default)
Recall Data
Data Backup
Site Air Channels
Site Cable Channels
4. Press to access Color Temp adjustments.
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
5. Press he or buttons to select the Color Temp type.
(Cool, Neutral, Warm1, or Warm2.)
KDL-40BX450/40BX451/46BX450/46BX451
SECTION 5 - UPDATES AND ADJUSTMENTS
Factory Mode
<[ TV ]>
<[ Off ]>
<[ Off ]>
>>
<[ Off ]>
>>
>>
<[ Off ]>
Off
<[ Off ]>
<[ Off ]>
<[ Off ]>
<[ Off ]>
[</>]Set [EXIT] Exit
Factory Mode
Color Temperature
<<
<[ Neutral ]>
<[ 538 ]>
<[ 512 ]>
<[ 452 ]>
<[ 512 ]>
<[ 512 ]>
<[ 512 ]>
<[ Off ]>
<[ Off ]>
[</>]Set [EXIT] Exit
6. After the correct Color Temperature is selected, press the
select the Temperature type that needs to be modified.
7. After the correct Temperature type is selected, press the
increase the data value, or press
8. Complete the data value adjustments to the remaining temperature
items within the selected temperature type.
NOTE: Changes to the data value must be saved within the
Temperature type selected before making changes to one of the
other Temperature types.
9. To save the changes, press the
press .
10. Do one of the following:
a. To make changes to one of the other Temperature types,
repeat steps 5 through 9.
b. To exit Factory mode, press
to
to
to decrease the data value.
to select Data Backup, then
POWER
.
27