Front Wheel Hub Tightening; Rear Spring Adjustment; Air Filter Service - Craftsman 108.27807 Operator's Manual

Front Wheel Hub Tightening

Front wheel bearing tightness and spindle nut retention are critical component
operations. An authorized service center must perform service work. Call
1-800-643-7332 for service.
Front
Flange nuts: Install with flat side
against wheel.

Rear Spring Adjustment

The rear shock absorber spring is adjusted by rotating
the adjuster to increase or decrease spring tension. Use
supplied rear spring adjustment spanner. See section 20
"Tools". Turn the adjustment to
the right to assure proper tension.

Air Filter Service

1. Remove seat.
2. Release clips and remove cover.
3. Loosen clamp and remove filter.
4. Remove fabric type pre-filter from
main filter. Wash pre-filter in soapy
water and dry it.
5. Reinstall pre-filter over main filter.
Replace main filter as required.
6. Reinstall filter into air box and tighten
clamp. Do not over tighten clamp or
filter damage may occur.
Rear
Tapered Nuts: Install with tapered
side against wheel.
Rear Spring Adjustment
Pre-filter
62
Main Filter
Main Filter