Motorola Droid Maxx 2 User Manual page 50

To automatically disconnect or reconnect a device (like a
wireless headset) anytime, just turn the device off or on.
Note: Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the laws and
drive safely.
Manage devices
To manually reconnect your phone with a paired device, tap
the device name in the list.
To manually disconnect your phone from a paired device, tap
the device name in the list, then tap OK.
To remove a paired device, tap
then tap FORGET.
To change the name your phone shows to other devices, tap
Apps > Settings > Bluetooth, turn Bluetooth power on,
then tap Menu > Rename this device. Enter a name and
tap RENAME.
Let devices find your phone
To let a Bluetooth device discover your phone, tap
the Bluetooth switch on your phone to turn it on.
Transfer files
• Photos or videos: Open the photo or video, then
tap > Bluetooth.
• Contacts: Tap Apps
tap Menu > Share > Bluetooth.
48 Connect & transfer
next to the device name,
> Contacts, tap a person, then
Wi-Fi Networks
Turn Wi-Fi power on/off
Find it: Apps > Settings > Wi-Fi, then tap the switch to
turn it on
Tip: To extend battery life, turn Wi-Fi off when you're not using
it.
Connect to networks
To find networks in your range:
1 Tap Apps > Settings > Wi-Fi.
Tip: To show your phone's MAC address and Wi-Fi settings,
tap Menu > Advanced.
2 Make sure the Wi-Fi power switch is on.
3 Tap a found network to connect to it (if necessary,
enter Network SSID, Security, and Wireless password, and
tap Connect).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, tap the network,
and enter the network's password.
Tip: When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before.