Adjusting Depth Of Cut; Bevel Cutting; Sighting - Makita 5077B Instruction Manual

Adjusting depth
of cut
Loosen the
lever
on the
depth guide and
move the base up or down. At the desired
depth of cut, secure the base by tightening
the lever.
Fig.
1
CAUTION :
Use a shallow depth of cut when cutting thin workpiece for cleaner, safer cuts.
*After adjusting the depth of cut, always tighten the lever securely.
Bevel
cutting
Loosen the lever on the bevel scale plate on
the front of the base. Set for the desired
angle (0" -45') by tilting accordingly, then
tighten the lever securely.
Sighting
For straight cuts, align the
l e f t
notch in the
front of the base with your cutting line on
the workpiece. For
45"
bevel cuts, align
the right notch with
it.
Bevel scale plats
For straight
For 45"
cuts
bevel cuts
Base plate
I 1
I
Fig.
1
9