Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ask Proxima Impact 400
- Page 1 USER GUIDE IMPACT 400 Not the actual front page 801.300 USG/400/AE-C 06.09.96...
- Page 2 USER GUIDE IMPACT 400...
- Page 3 USER GUIDE LCD PANEL...
-
Page 4: Table Of Contents
USER GUIDE TABLE OF CONTENTS 1 INTRODUCTION... 5 2 MAIN FEATURES ... 5 3 SUPPLIED MATERIAL ... 6 4 OPTIONAL MATERIAL ... 6 5 SETTING UP THE LCD PANEL ... 7 5.1 COMPUTER ... 8 5.2 RGB VIDEO ... 9 5.3 MOUSE ... - Page 5 USER GUIDE LCD PANEL This publication is printed on recycled paper. The information contained in this user guide is preliminary, and the products described herein are subject to change without prior notice. The symbols are used in this publication to indicate Warning and Note respectively.
-
Page 6: Introduction
USER GUIDE INTRODUCTION The LCD panel is a state of the art projection device that can be connected to most computers and display true 800 x 600 resolution. The ability to display a multitude of colors as well as high resolution makes it the ideal choice for presenting computer generated text and graphics. -
Page 7: Supplied Material
USER GUIDE SUPPLIED MATERIAL A complete set includes the following components : 1. LCD Panel 2. VGA-Cable 3. Cable-Adapt. MAC mon. 4. Cable-Adapt. MAC comp. 5. Mouse Cable 6. Mouse Adapter PC 7. Mouse Adapter Mac OPTIONAL MATERIAL Optional cables and adapters are available for special computer sources. 8. -
Page 8: Setting Up The Lcd Panel
USER GUIDE SETTING UP THE LCD PANEL Switch off all equipment before connecting the components. Be aware of static electricity that may build up, especially in the dry season and when operating on synthetic carpets. Discharge any static electricity by touching a metallic surface before you start. -
Page 9: Computer
USER GUIDE COMPUTER Connect the LCD panel, computer, monitor and power supply as shown in the rear foldout. Connect cable (1) between the LCD panel and the computer. The LCD Panel can be attached to computers and supports up to 1024x768 image resolutions in compressed/panning mode. -
Page 10: Rgb Video
USER GUIDE RGB VIDEO The LCD panel can project video images from Video Cassette Recorder or Laser Disk source using direct RGB connection with composite sync on H. When using the VGA-to-BNC adapter (Part# 301.111), connect the Red- Green-Blue to the RGB source and connect composite sync to the black H connector. - Page 11 USER GUIDE APPLICABLE ADAPTERS: MOUSE Microsoft 2 key compatible (9 pin serial port) PS/2 compatible mouse Macintosh ADB-bus mouse Please note that some computers using the Microsoft 2 key mouse may not allow the Y-split mouse adapter to work. A special straight PC adapter is available for this purpose. USING THE BATMOUSE : STEP OPERATION...
-
Page 12: Using The Lcd Panel
USER GUIDE LCD PANEL USING THE LCD PANEL The LCD panel has a set of connectors and controls that you need to know in order to operate the device correctly. REMOTE CONTROL The infrared BatMouse remote control (RC) is the main user interface to the device. - Page 13 USER GUIDE BATMOUSE KEYS : CONTROL FUNCTION CONTR Contrast (ratio between light and dark colors) BRIGHT Brightness (whiteness) TUNE Adjusts the stability of the image ON/OFF Turns the panel on/off RESET Defaults to standard settings BLACK Blackens the screen REAR Mirrors the image for rear projection FREEZE Holds the image displayed...
-
Page 14: Front Panel
USER GUIDE FRONT PANEL The front panel keyboard consists of a subset of the remote control keys. TUNE ON/OFF CONTROL FUNCTION TUNE Adjusts the stability of the image BRIGHT Adjusts the brightness (whiteness) of the image RESET Defaults to factory settings ON/OFF LED activity indicator CONNECTORS... -
Page 15: Features
USER GUIDE FEATURES The LCD panel has a variety of different features implemented. This chapter explains each feature in detail. 7.1.1 INTELLIGENT SAFECOOL SYSTEM The fan operation is controlled by the overhead projector light (OHP). This safety feature ensures that the fan is always operating as long as the OHP is turned on. - Page 16 USER GUIDE 7.1.4 BRIGHTNESS The brightness is the amount of white in an image. The brightness is adjusted to the ambient lighting conditions. Usually, a bright, low contrast image is preferred. Use the BRIGHT keys to adjust brightness. See also Contrast.
- Page 17 USER GUIDE resume on-line operation. Any other key pressed will also release FREEZE. 7.1.11 FREQUENCY This setting is provided for adaptation to computers and graphics adapters that are not recognized automatically by the panel. An incorrect frequency setting can be seen as an image to wide or too narrow, combined with vertical, unstable bands.
-
Page 18: Practical Hints And Tips
USER GUIDE PRACTICAL HINTS AND TIPS This is a list of what to do when things go wrong. Check the symptoms carefully if you experience any problem. The cure may be at your hands! Always press the RESET key and observe that the LED on the LCD panel is flashing. - Page 19 USER GUIDE The remote control is not working - Check if the batteries need replacement (observe LED on panel) - Be sure to point at the projection screen or directly at the IR eye in the front of the LCD panel - You may be too far away from the panel (max.
-
Page 20: Maintenance
USER GUIDE LCD PANEL MAINTENANCE From time to time, the housing and protection glasses may be cleaned with a damped, non abrasive cloth, possibly using a mild detergent to remove spots. The upper protection glass is not removable, as it only needs cleaning from the outside (the inside is sealed to the LCD module). - Page 21 USER GUIDE The technical data may change without prior notice in order to improve the product performance. The apparatus is designed for indoor use and should not be operated outside the general environmental limits, as this may lead to permanent damage and violation of any warranties.
- Page 22 USER GUIDE DISPLAY UNIT Full color (RGB) unit connecting directly to external video sources. SIZE WEIGHT LCD CELL COLOR RESOLUTION RESPONSE TIME CONTRAST RATIO PIXEL RESOLUTION SCREEN DIAGONAL MOUSE COMPATIBILITY VIDEO FREQUENCY HORIZONTAL FREQ. VERTICAL FREQ. COMPUTER INPUT DEFECTIVE PIXELS APPROVALS *) See compatibility list for applicable combinations 310 x 310 x 42 mm...
- Page 23 USER GUIDE POWER SUPPLY Primary switched universal type AC to DC converter. INPUT VOLTAGE OUTPUT VOLTAGES CONNECTOR APPROVALS REMOTE CONTROL Infrared wireless remote control. BATTERIES RANGE 100 to 250 VAC +5VDC, +12VDC, -5VDC 5 pin DIN male CE, TÜV, UL, CSA, N, S, D, FI 2 pcs LR03/AAA 1.5V penlight 23 feet LCD PANEL...
- Page 24 USER GUIDE COMPATIBILITY The unit is predefined for the following interfaces. In addition, the user can configure the panel for other interfaces with a total maximum of 40 definitions altogether (predefined and user defined). MODE RESOLUTION GENERIC 640x350 640x400 640x480 720x480 800x600 1024x768...
-
Page 25: Connectors
USER GUIDE 12 CONNECTORS The pinouts of all external connectors are described. POWER This connector feeds regulated DC power to the panel. MOUSE This connector is used for mouse control. COMPUTER This connector relays all sync and data signals from the computer to the panel and back again to the CRT monitor. -
Page 26: Fcc Statement
USER GUIDE 13 FCC STATEMENT This equipment has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class A limits may be attached to a computer that complies with Class A limits. -
Page 27: Environmental Statement
USER GUIDE 14 ENVIRONMENTAL STATEMENT This product is manufactured to minimize the stress and pollution of the surroundings. Where possible, recyclable materials are used. ITEM PACKAGING MECHANICS ELECTRONICS LCD MODULE RECYCLING / HANDLING Only recyclable materials are used Only recyclable plastics and metal is used. Recycling codes are moulded in the plastic. -
Page 28: Service Information
USER GUIDE 15 SERVICE INFORMATION In cases where a problem cannot be solved by the assistance of your dealer, please call the following number to get an RMA (Return Authorization Number) : +47 69 34 01 55 (Norway) To return the defective unit, package well (preferably using the original packaging material), enclose a copy of your sales receipt and a description of the problem you experience, and ship prepaid to : ASK AS... - Page 29 USER GUIDE LCD PANEL...
-
Page 30: Connection Layout
USER GUIDE 16 CONNECTION LAYOUT The foldout shows how to connect the LCD panel to the computer. 1. VGA Cable 2. Mouse Cable 3. Power Supply 4. Cable-Adapter MAC-mon. 5. Cable-Adapter MAC-comp. or other applicable comp./mon. adapters 6. Applicable Mouse Adapters LCD PANEL... - Page 31 801.300 USG/400/AE-C 05.09.96...