About The Controls On The Air Conditioner; Remote Control - GE AHL12ASW1 Owner's Manual And Installation Instructions

About the controls on the air conditioner
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE: The display
always shows the room
temperature except when
setting the Set temperature
or the Delay timer.
[] High
[] Had
[] Low
[]Cool []On
[] Fon Only •Off
[] Energy Saver
Unit power _41_
on/off
Mode select
Fan speed _
Delay 1-24hr
Temperature
set/Delay
Timer Increase
and Decrease ,-------,1!_
f
D
|
Q
O
D
Air Conditioner Controls
Remote Control
Controls
Power Pad
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in Cool or Energy
Sever modes. The Set light will turn on while
setting.
Tamp and Delay Increase +/Decrease -
Pads
Use to set temperature or delay time.
Temperature can be set in Cool, Energy Saving
and Auto mode.
Mode Pad
Use to set the air conditioner to Fan Only, Cool,
Energy Saver or Auto mode.
Fan Speed Pads
Use to set the fan speed to Low, Mad, or High
on the unit.
Reset Filter
LEDwill turn on when fan has accumluated 250
hours of run time as a reminder to clean filter.
Press Reset Filter to turn off the LEDand reset
the accumulated run time.
Delay Pad
Delay ON--When the air conditioner is off, it can
be set to automatically come on in i to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set to automatically turn off in i to
24 hours.
How to set:
Pressthe Delav 1-24hr pad on the unit or the
remote control. Eachtouch of the Increase + /
Decrease - pads on the unit or on the remote
control will set the timer in 1-hour intervals.
To review the remaining time on the Delay
1-24hr timer, press the Delay 1-24hr
pad
on the
unit or the remote control. Use the Increase +
/ Decrease - pads on the unit or on the remote
control to set a new time if desired.
To cancel the timer, press the Delay 1-24hr pad
until the light on the Delay 1-24hr pad goes off.
4