Initial Menu - Mitsubishi XEN-PC apricot Owner's Handbook Manual

Using the SETUP utility

Initial menu

When you invoke SETUP the initial menu contains two choices
as shown below:
BIOS Utility
System Configuration
System Security
= Move Highlight Bar, = Select, Esc = Exit and Reboot
Use the Up and Down arrow keys to move the highlight bar to
the item of your choice, and the return key to select that item.
System Configuration allows you to modify the hardware
configuration settings. You should only need to use this when
you make some change to the hardware, for example upgrade
the processor, or add an expansion card.
System Security allows you to configure the motherboard security
features. These include: setting passwords, restricting access to
floppy and hard disk drives, and configuring the serial and
parallel ports. A full description of the System Security screen
is given later in this chapter.
XEN-PC OWNER'S HANDBOOK 6/3