Maytag MER8850DS1 User Instructions page 5

Table of Contents

Advertisement

KEYPAD
FEATURE
INSTRUCTIONS
4. To change the temperature, repeat steps 1 and 2; Press START for the change to take effect.
5.
Press CANCEL when finished.
CONVECT
Convection
1. Press CONVECT ROAST.
ROAST
cooking
2. Press the number keypads to set a temperature other than 325°F (163°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START. Auto conversion will reduce the temperature by 25°F (15°C).
4. To change the temperature, repeat steps 1 and 2. Press START for the change to take effect.
5. Press CANCEL when finished.
CONVECT
convection
11 Press CONVECTBROiL
BROIL
cook ng
o
o
i
Press the number keypads to set atemperature
otheithan
350 F(177 C)in5
inciements
o
between 170 E and 500 F(77°C and 260 C).
3,
presssTAaT.Autoc0nversionwi!!
ieducethetemperaturebY25oF(15oc).
change the temperature, repeat steps ! and 2: Press START for the change to take effect
&Press
CANCEL when finished.
KEEP WARM
Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The
default temperature
is 170°F (75°C).
3. Press START.
4. Press CANCEL when finished.
DELAY START
Delayed Start
The DELAY START keypad is used to enter the starting time for an oven funCtion With a delaYed
start.
COOK TIME
Timed cooking
Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically. Delay start should not be used for foods such as breads
and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
POWER
Rapid
PrOVides the fastest preheat time for the BAKE functionl
PREHEAT
preheating
1. Press POWER PREHEAT.
Press the nUmbei keypads in resp0nse to the scrolling text tO enter the Bake temperature:
3.
Press START.
4,
ieminder t0ne Will SoUnd When the preheat temperature
s reached, PlaCe food inside the
oven.
NOTE" This feature should be used only for one-rack baking, unused racks shou d be removed
prior to Power Preheat. A standard f!at rack should be used for Power Preheat.
If Preheating foi the Bake cYc e has already Started, POwer Preheat maybe started directly by
pressing Power Preheat.
WARMING
Warming zone
Press WARMING CENTER ON to select the warming element on the cooktop, then press START.
CENTER
Press WARMING CENTER OFF to turn off the warming element.
ON/OFF
WARMING
Warming
drawer
Press WARM!NG DRAWER to select the warming Drawei funCtion
DRAWER
(on some models)
2
Press START to begin pieheating the warming drawerl
ON!OFF
Press WARM!NG D.P_..,WER to turn offthe heating element.
seethe
Warming Drawer
sectionfoimoreinformationl
CLEAN
Clean cycle
See the "Clean Cycle" section.
CONTROL
oven
control
NO keypads Will function With the controls locked,
LOCK
ockout
1
Check that the oven and the Kitchen Timer are off
hold 3 sec. to
"
ock
2. Press and hold CONTROL LOCK keypad for 3 seconds.
if enabled
atOne Will SoUnd and ,'CONTROE EocKEDII Wil! be displayed
4. Repeat to unlock.
SETTINGS
Oven use
Enables you to personalize the audible tones and oven operation to suit your needs. See the
functions
"Oven Use" section.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mer8800ds0Mer8800dh0Mer8850ds0Mer8800de0

Table of Contents