Table of Contents
Advertisement
Installing Door Handle & Leveling
:::::::::::::::::::::::::::::::::::::
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Door Handle
Mounting
Instructions
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
1.
Remove handle from carton and any
other protective packaging.
2.
Position handle end caps over upper
and lower preinstalled shoulder bolts
(A)that are fastened into door.
3.
While holding handle firmly against
door, fasten upper and lower Allen
set screws (B) with supplied Allen
wrench until there is no gap between
handle and door.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
_
Toe Grille Removal
To remove the toe grille, use a Phillips
screwdriver and remove the two screws
holding the toe grille to the cabinet. Then
pull the toe grille away from the unit.
Leveling
•
The freezer must have all bottom
corners resting firmly on a solid floor.
The floor must be strong enough to
support a fully loaded freezer.
It is VERY IMPORTANT
for your
freezer to be level in order to function
properly. If the freezer is not leveled
during installation, the door may be
misaligned and not close or seal
properly, causing cooling, frost or
moisture problems.
Grille
Advertisement
Table of Contents
