Frigidaire FGHB2866PF6 Use & Care Manual page 19

Options Hay Vary
exit
quick
freeze on
off
Toggles the options and run
modes.
Activates a faster rate for
freezing food and increases
ice production in the freezer.
Deactivates after 12 hours.
default
settings
water
While in the default option,
press and hold the set key
for three seconds to reset all
refrigerator settings to their
factory default settings.
Press the "water" key to select
water. A green indicator light will
be illuminated above the active
feature.
Toggles the temperature
displays On and Off.
crush
Press the "crush" key to select
crushed ice. A green indicator
light will be illuminated above
the active feature.
water filter
Allows the temperature set-
points to be adjusted. Control
temperatures range from -6°F /
-21°C to +6°F / -15°C.
Toggles dispenser light On and
Off.
Displays the current status of
the water filter (Good, Order,
or Replace). To reset the filter
status to "Good', press and hold
the "set" key for three seconds.
Setting cooling temperatures
(options may vary)
When you first power on the refrigerator, the
temperature displays 0°F and 37°F. After a
few seconds, both of the displays will switch to
"HI': The displays will continue to show "HI" for
20 minutes. After 20 minutes, the High Temp
alarm will sound and both displays will show
......... the actual temperature.
1
2
Plus (+) and Minus (-) indicators are located
on the right side of the control panel.
Press the + or - indicator to adjust the
temperature to the desired setting.
'19