Advertisement
5. Hold regulator and insert nipple into LP tank valve. Hand-
tighten the coupling nut, holding regulator in a straight line with
LP tank valve so as not to crossthread the connection.
Nipple hasto be centered
into the LP tankvalve.
Holdcouplingnut and regulator
as shown for properconnection
to LP tankvalve.
Congratulations
Your Kenmore gas grill is now ready for use. Before
the first use and at the beginning of each season
(and whenever the LP gas tank has been changed):
1. Read all safety, lighting and operating instructions.
2. Check gas valve orifices, burner tubes and burner
ports for any obstructions.
3. Perform gas leak check according to instructions
found on next page of the manual.
Important
Before cooking on your grill the first time, wash
cooking grids and cooking rack with warm, soapy
water. Rinse and dry thoroughly. Season with
cooking oil regularly. After cooking is completed, turn
grill to HIGH setting for 3 to 5 minutes to burn off
excess grease or food residue.
DISCONNECTING THE LIQUIDPROPANECYLINDER
Turnthegrill burnervalves"OFF"and makesurethe
grill is cool.
Turnthe LiquidPropaneCylindervalve"OFF"by
turningclockwiseuntilit stops.
Detachthe pressureregulatorassembly from the
cylindervalve by turningthequick couplingnut
counterclockwise.
Placedustcap on cylindervalve outletwheneverthe
cylinderis notin use. Onlyinstallthe type of dust cap
on the cylindervalve outletthat is providedwith the
cylindervalve.Othertypesof caps or plugsmay
resultin leakageof propane.
6. Turn the coupling nut clockwise and tighten to a full stop. The
regulator will seat on the back-check feature in the LP tank
valve, resulting in some resistance. An additional one-half to
three-quarters turn is required to complete the connection.
Tighten by hand only - do not use tools.
NOTE:
If you cannot complete the connection, disconnect regulator and
repeat steps 5 and 6. If you are still unable to complete the
connection, do not use this regulator! Call 1-800-4-MY-HOME
for assistance.
21
Advertisement
