Advertisement
Available languages
Available languages
i Preparation
for Installation
• Always have an assistant to help you. Never attempt to install
any air conditioner alone.
• You risk the possibility of hurting yourself or injuring others by
attempting to install it alone.
i
l Checkpoints
Prior to Installation
i
1 Carefully remove the unit from the packing case and lay it on
the floor and check that all accessories
(as indicated) are enclosed.
2 Check the cabinet and front grille of the unit for any defects such as
scratches.
3 Be sure to check the power supply.
• Refer to the specifications on the label attached to the unit.
i Installation
Conditions
i
1
Electrical Requirements
For personal
safety:
• This appliance
must be properly
grounded.
•
Do not, under any circumstances,
cut or remove the third grounding
prong from the power cord.
•
Do not use an extension
cord or an adapter plug with this appliance.
•
Do not change the plug on the power cord of this appliance.
• Follow national electrical codes or local codes and ordinances.
I
115V
230_208V
230-208V
230-208V
I
15 AMP
circuit
20 AMP
circuit
15 AMP
circuit
30 AMP
circuit
I
"parallel"
type
"perpendicular"
type
"tandem"
type
"tandem"
type
• If the electric supply provided does not meet the above
specifications, call a licensed electrician.
• Aluminum house wiring may pose special problems -
consult a qualified electrician.
• This unit requires a separate circuit, serving only this appliance.
Advertisement
