Page 2
Using the USB Cable 3000 Note: A USB driver is required for remote control from a computer. Download the driver from the Yaesu website (http://www.yaesu.com). The FT 3000 transceiver has a built-in USB to Dual...
Page 3
PERATION OMPUTER IDED RANSCEIVER ONTROL OMMAND Parameters A computer control command is composed of an alpha- betical command, various parameters, and the terminator Parameters are used to specify information necessary to that signals the end of the control command. implement the desired command. Example: Set the VFO-A frequency to 14.250000 MHz.
Page 4
PERATION OMPUTER IDED RANSCEIVER Function Function OMMAND OMMAND VFO-A TO VFO-B POWER CONTROL ANTENNA TUNER CONTROL SPEECH PROCESSOR LEVEL AF GAIN SPEECH PROCESSOR AUTO INFORMATION POWER SWITCH VFO-A TO MEMORY CHANNEL QMB STORE ANTENNA NUMBER QMB RECALL VFO-B TO VFO-A QUICK SPLIT AUTO NOTCH RF ATTENUATOR...
PERATION OMPUTER IDED RANSCEIVER VFO-A TO VFO-B Read Answer A A A A A C C C C C ANTENNA TUNER CONTROL P1 0: Fixed P3 0: Tuner “OFF” P2 0: Fixed 1: Tuner “ON” P1 P2 P3 2: Tuning Start Read Answer P1 P2 P3...
PERATION OMPUTER IDED RANSCEIVER MEMORY CHANNEL READ P1 Memory Channel Number(001 117) P2 Current Memory Channel P3 Memory Channel Frequency (Hz) P4 Clarifier Direction +: Plus Shift, -- : Minus Shift Read Clarifier Offset: 0000 - 9999 (Hz) P1 P1 P1 P5 0: RX CLAR “OFF”...
Page 14
PERATION OMPUTER IDED RANSCEIVER OPPOSITE BAND INFORMATION P1 Current Memory Channel(001 117) P2 VFO-B Frequency (Hz) P3 Clarifier Direction +: Plus Shift, -- : Minus Shift Clarifier Offset: 0000 - 9999 (Hz) Read P4 0: RX CLAR “OFF” 1: RX CLAR “ON” P5 0: TX CLAR “OFF”...
Page 15
PERATION OMPUTER IDED RANSCEIVER QMB STORE Read Answer QMB RECALL Read Answer QUICK SPLIT Read Answer RF ATTENUATOR P1 0:Fixed P2 0: OFF P1 P2 1: 6 dB Read 2: 12 dB 3: 18 dB Answer P1 P2 R R R R R C C C C C CLAR CLEAR Read Answer...
PERATION OMPUTER IDED RANSCEIVER NOISE REDUCTION LEVEL P1 0:Fixed P2 01 - 15 P1 P2 P2 Read Answer P1 P2 P2 READ METER P1 0: Depends on the front panel METER 5: PO 1: S 6: SWR 2: Depends on the front panel METER 7: ID Read COMP /ALC /SWR /ID/VDD...
Page 19
Copyright 2014 YAESU MUSEN CO., LTD. All rights reserved No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD. 1410-B0...