Jumper Settings - MATSONIC MS9118E Series User Manual

Jumper Settings

1
JP2
1
JP1
JP1: Clear CMOS Jumper
This jumper is to clear the contents of CMOS memory. You may
need to clear the CMOS memory if the settings in the Setup Utility
are incorrect that prevents your mainboard from operating. To clear
the CMOS memory, disconnect all the power cables from the
mainboard and then move the jumper cap into the CLEAR setting
for a few seconds.
Function
Normal
Clear CMOS
JP2: BIOS Protect
This jumper enables you to prevent BIOS from being flashed.
Make the BIOS read-only.
Function
Unprotect
Protect
2: Mainboard Installation
Jumper Setting
Short Pins 1-2
Short Pins 2-3
Jumper Setting
Short Pins 1-2
Short Pins 2-3
13