Connections; Basic Install Tiona; Power Cord Connection - THOMSON L4218HD Instruction Manual

4. BASIC INSTALL TION
- Connect the power cord correctly as shown.
- Press the POWER switch of your LCD V to switch
green.
INSTALLATION OF ANTENNA
Connect the 75 OHM coaxial cable from the antenna to the antenna socket on the rear panel, as
shown above.
NOTES:
For better reception, especially in outlying areas or where ghost or interference happens, an external
roof-mounted antenna is recommended.
For UHF TV reception, use the specified UHF antenna. Consult the local AV technician.
When using 300 OHM flat cable, a 300 OHM-75 OHM adapter should be adopted for a proper
connection to the antenna jack (The adaptor not supplied).
A

Power Cord Connection

T
Antennas
VHF TV ANTENNA
UHF TV ANTENNA
75 OHM COAXIAL CABLE
300 OHM FLAT CABLE
the unit on . The power indicator on the front panel lights up in
Connection
300 OHM 75 OHM ADAPTOR
9
BASIC INSTALL TION A
AC IN
To TV ANTENNA JACK
75 OHM DIN