Management Vlan Settings - EnGenius EAP1200H User Manual

Management VLAN Settings

This page allows you to assign a VLAN tag to the packets. A
VLAN is a group of computers on a network whose software
has been configured so that they behave as if they were on
a separate Local Area Network (LAN). Computers on VLAN
do not have to be physically located next to one another
on the LAN.
To configure VLAN tags, you must first Isolate and enter
a VID before enabling VLAN under Management VLAN ID.
Note: Only applicable in Access Point and WDS AP mode.
Profile Isolation: Restrict clients from communicating with
different VIDs by checking the Isolation box for the SSID
you wish to select under the Wireless Settings funtion.
VLAN ID (VID): Specifies the VLAN tag for each profile.
Management VLAN ID: If your network includes VLANs,
you can specify a VLAN ID for packets pass through the
Access Point with a tag. Otherwise, select no VLAN tag.
Save: Click Save to confirm the changes.
Note:
1. If you reconfigure the Management VLAN ID, you may
lose your connection to the EAP1200H. Verify that the
DHCP server supports the reconfigured VLAN ID, then
reconnect to the EAP1200H using the new IP address.
47