Advertisement
E. Connecting power supply for the Indoor
Camera Unit
G. Fastening the cover for the Monitor Unit
WARNING:
STRANGULATION HAZARD – In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and
out of their reach. Never place camera or cords within a crib or near a bed. Secure the cord away from children's reach. Never use extension cords with AC
Adapters. Only use the AC Adapters provided.
As with any electrical device, supervision of your pet's usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing,
we strongly recommend you keep this and all other electrical devices out of its reach.
F. Installing the battery pack for the Monitor Unit
Connect the small plug of
the power adapter to the
camera unit and the other
end to the electrical outlet.
Only use the enclosed
Black Red
adapter (5.9V DC/1000mA).
H. Connecting power supply for the Monitor Unit
Small cross head or
Flat end screwdriver
Insert the wire tab of the
rechargeable battery pack into
the contact slot as shown and fit
the battery pack into the
compartment.
Connect the small plug of the
power adapter to the monitor
unit and the other end to the
electrical outlet.
Only use the enclosed adapter
(6V DC/500mA).
Advertisement
