Step 3
Play the keyboard.
No sound will be heard. This is because the RIGHT 1 part is now inactive.
Let's activate the RIGHT 2 part and assign a sound to it.
Step 4
Press the RIGHT 2 panel button.
Step 5
Select the Warm Strings sound for RIGHT 2.
Press the EXIT panel button, or wait for a few seconds, to return to the MAIN screen.
Step 6
Play the keyboard.
The beautiful sound of Warm Strings will be heard.
The procedure above allows us to assign different sounds to the RIGHT 1 and RIGHT 2 parts, activating and deactivating each
part as desired, without having to reselect the same sounds multiple times. As noted previously, it is also possible to combine
both the RIGHT 1 and RIGHT 2 parts (often referred to as 'DUAL MODE'), allowing sounds to be layered together.
The LED indicator for the RIGHT 2 panel button will
turn on to indicate that the part is active.
Warm Strings will be written in large letters to indicate
that the Warm Strings sound is selected, and that the
part is active.
Page
9
2