Chapter 2 Operating Principles Holder Assy; Removing The Driven Pulley, Driven Pulley Spring, And The Driven Pulley Holder Assy - Epson Perfection 4490 photo Service Manual
Color image scanner photo
automatic document feeder
Hide thumbs
Also See for Perfection 4490 photo:
- User manual (22 pages) ,
- Quick start manual (2 pages) ,
- Product information manual (11 pages)
Table of Contents
Advertisement
EPSON Perfection 4490 Photo
4.2.8 Removing the Driven Pulley, Driven Pulley Spring,
and the Driven Pulley Holder Assy.
1.
Remove the Carriage Unit.
See Section 4.2.3 on page 34.
2.
Hold the A part of the Driven Pulley Holder Assy. and slide it in the direction of
the arrow to remove the assy. from the two tabs on the Lower Housing.
Driven Pulley Holder Assy.
Figure 4-21. Removing the Driven Pulley Holder Assy.
Disassembly / Assembly
A part
Tabs
Disassembly Procedure
3.
Remove the Driven Pulley Spring from the Driven Pulley Holder Assy.
4.
Remove the washer and remove the Driven Pulley from the shaft of the Driven
Pulley Holder Assy.
Driven Pulley Spring
Figure 4-22. Removing the Driven Pulley and the Driven Pulley Spring
Revision B
Washer
Driven Pulley
42
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
