Advanced; Softap - TP-Link Archer T4UH User Manual

Archer T4UH
3.3.3

Advanced

Select wireless configuration tool - In Windows XP. You can either use TP-LINK Utility or
Windows wireless configuration tool. While in other operating systems, since you can use both
TP-LINK Utility and Windows wireless configuration tool at the same time, this function is
disabled.
Wireless network adapter switch - If you've installed several adapters in your computer, you
can switch to another adapter among the drop-down list.
SoftAP mode - Once ON is selected, the adapter will work as an AP.
Power Save mode - Once ON is selected, the adapter will automatically reduce its power
consumption when not being used.
3.3.4

SoftAP

SoftAP is short for Software enabled Access Point. When the adapter works in SoftAP mode, it
allows the computer to create a wireless hotspot that other wireless devices nearby can use.
To switch to SoftAP mode, right-click the utility icon
to SoftAP mode.
After switching to SoftAP mode, the SoftAP icon appears in the utility. Click the SoftAP tab, and
complete the settings, then click Apply for the settings to take effect.
AC1200 High Gain Wireless Dual Band USB Adapter User Guide
14
in the system tray and select Switch