Operation; Know Your Air Compressor - Craftsman 107.16575 Owner's Manual

Ce] _ =1 __,_1 iI[e] _1
Handle Fig. 2
On/Off
power
switch
Tank
pressure
gauge
Regulator
pressure
gauge
Pressure
regulator
knob
Safety
valve
Lockin
nut
Cord rewind
hook
Power
cord
Long inflation
_,_, chuck
_Tlre gauge
Blow gun
Quick
couplers
Rubber
foot
Drain
valve
Tank
Thread sealing
tape
1/4 in. male
connector fitting
_,_1/4 in. male connector fitting
25' PVC
hose
KNOW YOUR AIR COMPRESSOR (see figure 2)
Before attempting to use this product, familiarize yourself with all
operating features and safety rules.
Oil-free universal motor
Your air compressor features permanently lubricated bearings.
Air compressor pump
To compress air, the piston moves up and down in the cylinder.
On the down stroke, air is drawn in through the air intake valve
while the exhaust valve remains closed. On the upstroke, air is
compressed, the intake valve closes and compressed air is forced
out through the exhaust valve, into the discharge line, through the
check valve and into the air tank.
On/Off power switch
This switch is used to start or stop the air compressor. Moving the
switch to the (ON) position wilt provide automatic power to the
pressure switch which wilt allow the motor to start when the air
tank pressure is below the factory set cut-in pressure. When in
the (ON) position, the pressure switch stops the motor when the
air tank pressure reaches the factory set cut-out pressure. Moving