Detaching And Refitting The Retard Roller Assembly - Kyocera FS-3040MFP+ Service Manual

(2) Detaching and refitting the retard roller assembly

Procedure
1. Remove the cassette.
2. Unhook two hooks and then remove the
retard guide.
3. Remove the retard holder (roller) from
the retard guide.
4. Check or replace the retard roller and
refit all the removed parts.
NOTE:
When the periodic maintenance
(replacing the maintenance kit, see
page 2-4-4), perform maintenance
mode.:
U251 Clearing the maintenance count
(see page 1-3-14)
Cassette
Retard holder
(Retard roller assembly)
1-5-7
Hook
Retard
guide
Hook
Figure 1-5-8
Retard guide
Figure 1-5-9
2MF/2MG