Table of Contents
Advertisement
20
Installing a Floppy Diskette Drive
The motherboard has a floppy diskette drive (FDD) interface and ships wiht a
diskette drive ribbon cable that supports one or two floppy diskette drives. You can
install a 5.25-inch drive and a 3.5-inch drive with various capacities. The floppy
diskette drive cable has one type of connector for a 5.25-inch drive and another type
of connector for a 3.5-inch drive.
FDD: Floppy Disk Connector
Connect the single end of the floppy connector to the onboard floppy connector
firstly, and then connect the remaining plugs on the other end to the floppy drive
correspondingly.
You must orient the cable connector so that the pin 1 (color) edge of the
cable corrseponds to the pin 1 of the I/O port connector.
* For reference only
Installing the Motherboard
Hide quick links:
Advertisement
Table of Contents
