Table of Contents
Advertisement
Auto shut-off function
•
If the iron is not moved for a certain period of time, it will shut off automatically:
•
After shut off, the iron will stop heating up and the operation indicator (11) will
flash.
•
Tilt the iron down and back to restart the iron.
•
The iron will begin to heat up to the previous setting.
noTE: To shut off the iron completely, set the temperature control (5) to off and
disconnect from the wall outlet.
Turning the iron off and emptying the water reservoir
After use, set the temperature control (5) to off (ill. k ).
•
•
Make sure to slide the function control (4) to the dry ironing
•
Disconnect the iron from the wall outlet and let it cool completely.
•
Place the iron on its heel (10) on a flat, dry and level surface (ill. d ). Press the fill
inlet cover
Hold the iron upside down over a sink to empty the water reservoir (12) (ill. l ).
•
Store the iron on its heel (10) in a safe place (ill. d ).
•
CAuTion! during the cooling process, do not touch the soleplate (15) to feel the
temperature (ill. e ). danger of burns!
Iron-169234-04 (GB).indd 11
OPERATION
position
illustration
On soleplate
On the side
On the heel
(2) to open (ill. a ).
Time
30 seconds
30 seconds
15 minutes
11
position (ill. g ).
5/13/10 9:15 AM
Advertisement
Table of Contents
